|
#S100 Strobe Light (Synchronized to the Web) - $735 Provides a bright, synchronized, high-speed flashing light. It permits visual web inspection at high speeds. Freeze frame. Requires at least one of the optical scanner options. |
|
#F10K Foot Speed Control - $140 A very helpful option that permits improved rewind productivity. |
|
#LRD6110 Transparent Label Detector - $875 |
|
#LWP-12 Long Web Path (For Inkjet & Applications) - $650 This option affords a 12 foot long web path which is necessary when applying ink jet printing, secondary labels and bar code verifiers. It is also helpful when inspecting with a strobe light. |
|
#LWP-12M Modified Long Web Path (For LDR6110 Option) - $575 Needed when using a LRD6110 sensor. |
|
#ML6.0 Missing Label Detector - $675 An optical beam and amplifier along with a counter interface junction box. When it detects a missing label, a signal is sent to the counter and immediately shuts down the winding process. This gives the table operator a chance to replace the missing label on the web. After replacing the label, the rewind can be continued by pressing the start switch on the speed control. The winding will continue until it finds another missing label or completes the desired label count. |
|
#TX5 Optical Label Counter (For Die Cut Labels) - $495 A solid state light beam and amplifier assembly that interfaces with the rewinder's counter and is designed to accurately count die cut labels at high speeds. A space out of at least 1/16" is required between labels. This option will insure a very accurate label count in each roll you ship to your customer. NOTE: If your customer is using these rolls in a label application machine, then you should add option #ML6.0 (Missing Label Detector) so that you can supply rolls with no out of sequence labels. |
|
#SL2000 Slitting Attachment (3 Slitting Holders) - $540 Attaches to the optic scanner support, adjustable. Mounts between idler rollers.
|
|
#CZ-K1 Color Detecting Optical Label Scanner - $1,200 A solid state light beam and amplifier designed to detect various colors on the face of the label. The amplifier can be set to detect any color you select. When detected, it will shut down the winding process. |
|
Spinning Unwind - $980
|